Purchase Principles And Installation Methods of Tree Floor Lamp

The tree floor lamp is usually placed at the sofa corner. It has soft light, which can bring great effect when watching TV at night. The shade of tree floor lamp has various materials and consumers can choose according to their preferences. Many people like lighting floor lamps with small countertops because the landline can be placed on the countertop.

1. Purchase guide of the tree floor lamp

(1) You should consider the height of the ceiling when purchasing a tree floor lamp. For example, a 1.70 meters or 1.80 meters tree floor lamp is suitable for the ceiling above 2.40 meters. The light can only be concentrated in the local area if the ceiling is too low, which will bring over-bright light. At the same time, white or light-colored ceilings are suitable for the torchiere tree floor lamp. Besides, it is better for the ceiling to have a reflective effect.

(2) Everyone should be more familiar with the standard tree floor lamp, and there is no difficulty in purchasing. However, it should be noted that the lower edge of the shade should be lower than the eyes so that eyes will not be uncomfortable due to the light. In addition, the over indoor light contrast will increase the load on the eyes. So, you should try to choose a tree floor lamp that can be adjusted. Due to the concentrated light of the standard tree floor lamp, you should avoid mirrors and glass products near the reading position to avoid discomfort caused by reflections.

(3) If you want to know more about purchasing the tree floor lamp, you are recommended to look at the "decorative tree floor lamp" by visiting some novel lamp stores or home furnishing stores. The decorative tree floor lamp is not used for lighting, which is more like a "light sculpture" at home. The purchase of this type of tree floor lamp should be consistent with the overall style of your home. For example, a noble and classic tree floor lamp with granite is totally unsuitable with the streamlined modern furniture of yuppie style.

2. Installation methods of the tree floor lamp

In addition to the heavy drop lamp and wall lamp with various decorations, you can install the table lamp and the tree floor lamp by yourself. Although different product designs of lamps will lead to different installation methods, there are often similar. However, we need to pay attention to the following points when installing the chic floor lamp:

(1) You should read the installation drawings carefully before installation, and prepare common tools such as flathead screwdrivers, Phillips screwdrivers and hammers. You should not confuse the parts after unpacking the packaging. If there are many similar parts, the drawing has a comparison chart of the actual size. You can cross the unused parts so that it is very easy to distinguish the various parts.

(2) If you find the plate is damaged, you can contact the retailer for replacement. There is no need to worry about the positioning of the parts since guide holes are opened on screws, eccentric parts, and wooden shafts that need to be installed. However, you should note do not install wrong parts and repeatedly screw them, which is easy to damage the plate. Even you install it successfully, there are problems of instability.

(3) In general, lighting floor lamps have cast iron chassis, which is slightly smaller than the surface base. The order of parts from bottom to top should be chassis fastening nut, cast iron chassis, base, lamp pole, lamp holder, shade, plastic clip and bulb.

Related Articles